Photographers have traditionally relied on film for image
acquisition, but all that has changed with the advent of digital imaging
technology. So does film still have a place for the modern photographer
in today's brave new world of binary realms and digital frontiers? In
this tutorial we'll look at the pros and cons of digital and film
cameras for night photographers.
Analogue Imaging
When
I first began my career as a cameraman, film was the only available
option. These days film has been largely replaced with digital
technology, but there are still some situations where it might offer
certain advantages to the night photographer.
There are basically
two types of film: colour reversal film (often called a negative) and
slide film. The latter generally offers superior image quality, and you
can choose either colour or black and white varieties.
There are
many different film emulsions to choose from, ranging in speed from
ISO 25 up to ISO 6400. This ISO rating refers to the sensitivity of the
film, with lower numerical values equating to slower speeds that require
more light. Fujichrome
Velvia, used in this photo. is a favourite film emulsion for landscape
photographers. Its saturated colour and fine grain are legendary.A
film rated at ISO 100 requires twice as much light as a film rated at
ISO 200. To get the same exposure you have to double the shutter speed
or open up the lens one full f-stop. The benefit of using slower speed
rated films is that they have a finer grain structure, equating to an
increase in resolution.
As digital technology continues its
relentless march forward, film has been left behind, and there are far
fewer film stocks available now than there were around the turn of the
century. The venerable Kodachrome slide film is a case in point—it was
withdrawn from sale a few years ago, and parent company Kodak filed for
bankruptcy.
So what can film offer that digital does not?
One
of the considerations with any digital device is that they require
electricity to function. These new camera technologies are driven by
power-hungry image sensors and integrated circuits, and without power
they simply can't take pictures.
With an old mechanical film
camera, you don't need batteries or an AC power supply for the camera to
function. The only battery these cameras require is used by the
exposure meter, and even if it goes flat you can still operate the
shutter and take a photo.
By using a film camera with a cable
release, you can set exposure times of several hours' duration. This is
very useful if you wish to do star trails, or take photos where there is
very little available light and ultra-long shutter speeds are required This
photograph of the night skies over Lake Eyre in South Australia's
remote outback is an example of a long exposure of several hours'
duration, and was taken with a film camera. The green colour cast is due
to the effects of reciprocity failure—a magenta colour correction
filter would help to alleviate this problem.
Another advantage of using film is that you
don't have to worry about digital file storage requirements. Again,
this can be important if you are in a remote location where you don't
have access to mains power.
If your camera's storage card begins
to fill up, you will need to archive those files to a device such as a
hard drive, computer, or tablet, and these will require AC power or DC
batteries to operate. However, storage cards are becoming cheaper and
larger capacities more common, so carrying many extra cards with you is a
viable option.
Film also has some disadvantages, the primary one
being cost. It is expensive to shoot film: not only do you have the
expense of paying for the film to begin with, but you also have to pay
the processing costs to have your pictures developed afterwards.
If
you wish to have your images available for the web or for computer
displays, you will also need to "digitise" the film to transfer it from
the analog to the digital realm, and this is yet another expense that
you will incur.
There is also a much longer learning curve when
shooting film, as you don't have the instant feedback you get with
digital cameras. You won't know the results of shooting on film until
after you have your work processed, and you cannot review your work at
the time of shooting as you can with digital.
You may also come
across a problem inherent in film called reciprocity failure. Because
most films are designed for shutter speeds between one second and one
10,000th of a second, any shutter speed outside of these parameters may
require exposure compensation or colour correction to negate the effects
of reciprocity.
In the case of exposure compensation, you may
need to double the length of time the shutter is open, or open up the
lens aperture by one stop to get correct exposure. Film may also exhibit
a colour shift due to reciprocity, and this will require a colour
correction filter on the lens to restore accurate colour balance.
Digital Acquisition
So
now that we have covered film, it is time to move into the 21st century
and talk about digital cameras. This newer technology offers so many
advantages that digital acquisition has almost entirely replaced film as
the medium of choice for today's photographer.
When digital
cameras first arrived on the scene they were fairly primitive in their
capabilities. Resolution was typically only a few megapixels, as sensor
technology and digital signal processing were in their infancy.
Image
quality was inferior, and there were many shortcomings such as poor low
light capabilities and a lack of dynamic range, especially when
compared to medium or large format film images.
The first digital
camera I owned was a Nikon D50 with a 6 megapixel CCD image sensor. I
bought this camera simply to experiment with this new technology, but it
soon became quite apparent to me that digital image acquisition was a
game changer.
The ability to review photos instantly to check
focus, exposure, composition and colour balance made the job of a
photographer far easier. It helped to accelerate the learning curve,
leading to less guesswork and fewer mistakes.
This new technology
also opened up creative possibilities that were not possible or were far
more difficult with film cameras. The ability to shoot time lapse
sequences, create multiple exposure compositions, and use high dynamic
range imaging made digital cameras a very exciting proposition. Digital
allows you to use advanced image processing techniques to enhance
contrast and colour, adding impact to your photos like the high dynamic
range processing I used in this picture.
At the heart of a digital camera is its image
sensor, and it is this sensor that captures the light coming through the
camera's lens. Digital sensors come in a variety of different types,
including CCD, CMOS, and NMOS. Resolution ranges from a few megapixels
up to the gigapixel capabilities of sensors found in scientific imaging
devices such as telescopes.
The resolution of the image sensor is
dependent on the number of pixels present, but as the pixel count
increases, other image quality factors like the sensor's low light
capabilities are compromised.
One way camera manufacturers have
negated this effect is to maintain the same number of pixels but
increase the physical size of the sensor, thereby increasing its
light-gathering ability.
When choosing a digital camera for night
photography, it is important to consider the quality of the image
sensor, as low light conditions are common. It is therefore a good idea
to consider one of the larger-sized image sensors, such as those found
in full frame cameras.
A full frame sensor is equivalent in size
to a 35 millimetre film frame, and will give you amazing low light
capabilities. However, full frame cameras can be quite expensive and are
less forgiving of the lenses' optical quality, so your investment will
generally be higher for both the camera body and the lenses you wish to
use. A
full frame camera is the best option for low light images, and the
benefits of high dynamic range and low sensor noise are two of the
advantages of this type of camera.
If your budget won't allow for the the
purchase of a camera with a full frame sensor, then I would recommend
you look at cameras with either an APS-C or Micro Four Thirds size image
sensor, as even these cameras are more than capable of creating images
with very high resolution, good low light performance, and excellent
dynamic range.
Previous generations of digital camera had certain
limitations when being used in low light conditions, such as high levels
of digital noise, but modern digital cameras have addressed these
problems. Performance now is far superior to that of cameras available
even a few years ago.
These days we are absolutely spoilt for
choice, and today's low-cost entry-level models have image quality that
rivals or exceeds previous generations of expensive professional
cameras. All you need is the talent and knowledge to exploit their
capabilities.
I rarely shoot film these days, but I am glad to
have had experience in this type of photography, because I learnt not to
waste exposures due to the expense involved, and I believe it helped to
sharpen my skills considerably. The
best of both worlds. Digital was used to shoot the cityscape image of
Hong Kong, and the star trail exposure was shot using film, with the two
exposures then combined in software to create this composite image.
Cityscape Image—Camera: Nikon D200; Lens: Nikkor 10.5 mm f2.8 ED
Fisheye; Exposure: ISO 100 - f11.0 - 15 Seconds. Sky Image—Camera:
Nikon FM2; Lens: Nikkor 50 mm f1.4; Film: Fujichrome Velvia;
Exposure: ISO 50 - f5.6 - 1 HourIn the next
part of this series, I'll cover equipment for night photography and what
I think is the most important investment you will make in your camera
system: your lenses.